Hydraulics / electrohydraulics pack

Hydraulics / electrohydraulics packHydraulics / electrohydraulics pack - a combination of products that give solution for hydraulics and electrohydraulics.

Hydraulics / Electrohydraulics pack  

 

Product Configurator - Product packs
Catalogue - Product packs

The combination of various products in SMC International Training product range that provide solutions to the most common needs in hydraulics / electrohydraulics. 

 

• SAI7391 Hydraulics / Electrohydraulics pack

 

This hydraulics / electrohydraulics pack is designed to:

• Aquire knowledge.

• Design and simulate the circuits.

• Test and operate the real circuits with more than 30 activities available.

 

   Composition of the pack (SAI7391)

 

 Part number   Description   Qty. 
SAI9280  Hydraulic rolling table with double face panel 1
SAI9274  Hose support accessory (x2) 1
SAI9261  Hydraulic pump for two workstations 1
SAI9260  Set of drawers with lock 2
SAI9506  HYD-201: Hydraulics level I kit 2
SAI9507  HYD-202: Hydraulics level II kit 2
SAI9508  HYD-203: Electro-hydraulics kit 2
SAIU020-001  SINGLE USE licence for the eLEARNING-200 pack of courses 6
SAI2252  autoSIM-200. 1 educational license 2
SAI7389  Poster of the composition (HYD-201 - HYD-202 - HYD-203) 1

 

  

   List of activities for HYD-201, HYD-202 and HYD-203:

 

HYDRAULICS
 • Pressure generation. Pump specifications.
 • Directly operated pressure limiter valve.
 • Distributor valves 2/2, 3/2, 4/2.
 • Double acting cylinder.
 • Check valve.
 • Flow rate regulation valve.
 • Flow regulation valve with pressure compensation.
 • Adjustable choke valve with check.
 • Resistance to fluid passage (load losses).
 • Distributor valve 4/3.
 • Differential circuit.
 • Pressure adjustment.
 • Speed adjustment. Adjustment at the input.
 • Speed adjustment. Adjustment at the output.
 • Speed adjustment in subtraction.
 • Check valve with unblocking (piloted).
 • Back pressure. Uniform advance of the piston.
 • Input and output flow regulation.
 • Pressure reducer valve.
 • Indirect control pressure limiter valve.
 • Consecutive control depending on the pressure valve (circuit with sequence valves).  
 • Quick feed circuit (two speeds). 
 • Hydraulic motor.
 • Accumulator.
 • Pressure regulation circuit.
 • Speed adjustment Differences between choke and pressure compensated flow regulator.

 

ELECTROHYDRAULICS
 • Feed and return circuits from one cylinder at will.
 • Self-retaining in an electronic-hydraulic circuit.
 • Control of a double acting cylinder with stroke limiters.
 • Drive progress with initial conditions.
 • Circuit with initial safety condition and intermediate stops at will.
 • Circuit with pressure switches.
 • Control of a cylinder with mechanical interlocking.
 • Drive with intermediate stop electrical interlocking.
 • Sequential circuit according to the pressure and route.

 

 

   Complete laboratory

 

Proposal for the hydraulics / electrohydraulics complete laboratory: 4 stations with 2 workstations (up to 24 students).

 

 

• SAI7392 Complete laboratory - hydraulics /electrohydraulics

 

 

• Composition for the complete laboratory (SAI7392):

 

 Referencia   Descripción   Cantidad 
SAI7391  Hydraulics / electrohydraulics pack 4
SAI2254  AutoSIM-200, 16 educational licenses 1
SAI7390  Posters of hydraulic symbols 1
SAI9553  Basics of hydraulic theory in English 1

 

SAI7392 - Hydraulics / electrohydraulics complete laboratory.

 

Go back to Product Packs